</a>LED" title="LED">LED" title="LED">LED驅動解決方案,包括調光LED驅動控制器,滯后電流調整,閉環LED電流調光控制,模擬/PWM調光輸入,集成了高壓穩壓器,250uA微功耗起動,主要用在LED照明/CFL替代燈以及LED驅動模塊.本文介紹了IRS2980主要特性,方框圖, 應用電路圖以及90-250VAC離線LED驅動器IRPLLED7參考設計主要特性,方框圖, 電路圖和材料清單.
The IRS2980 utilizes International Rectifier’s control and high-voltage technologies to realize a simple, high performance dimming LED driver solution. This solution is based on a hysteretic topology where the high frequency AC output current is controlled by adjusting the oscillator frequency and duty cycle.
IRS2980主要特性:
• Dimming LED driver controller
• Hysteretic Current Regulation
• Closed-loop LED current dimming control
• Analog/PWM Dimming Input
• Internal High Voltage Regulator
• Internal 15.6V zener clamp diode on Vcc
• Micropower startup (250μA)
• Latch immunity and ESD protection
LED驅動器系統特性:
• Single chip dimming solution
• Simple LED current dimming control method
• No external protection circuits required (fully internal)
• Easy to use for fast design cycle time
• Increased manufacturability and reliability
IRS2980典型應用:
• LED incandescent/CFL replacement lamps
• LED driver module
圖1. IRS2980方框圖
圖2. IRS2980應用電路圖
采用IRS2980的90-250VAC離線LED驅動器IRPLLED7
Solid state light sources are now available that offer viable alternatives to Fluorescent and HID lamps and far surpass incandescent lamps. Luminous efficacy expressed in Lumens per Watt has now reached levels enabling LEDs to be used for general illumination. High brightness LEDs also possess the added advantages of longer operating life span up to 50000 hours and greater robustness than other less efficient light sources making them suitable for outside applications such as street lighting.
High power LEDs are ideally driven with constant regulated DC current, requiring a "driver" or "converter" to provide the required current from an AC or DC power source. A simple single stage power converter based around the IRS2980 LED driver IC provides a controlled current output over a wide AC line or DC voltage input range.
The IRPLLED7 evaluation board is an off line non-isolated constant current Buck regulator LED driver designed to supply a 350mA DC output current. The LED output voltage can be up to 90% of the input voltage, operating from an AC line input voltage between 90 and 250VAC 50/60Hz. It also includes PWM dimming capability from 10% to 100% of light output controlled by an on board potentiometer.
圖3. 90-250VAC離線LED驅動器外形圖
90-250VAC離線LED驅動器主要特性:
Featuring IRS2980S HVIC LED driver
Non-isolated buck regulator
90-250V AC input voltage
0-50V DC output voltage
Regulated output current of 350mA
PWM dimmable
圖4.90-250VAC離線LED驅動器IRPLLED7方框圖
圖5. IRPLLED7電路圖
90-250VAC離線LED驅動器IRPLLED7材料清單:
詳情請見:
http://www.irf.com/product-info/datasheets/data/irs2980spbf.pdf
和
http://www.irf.com/technical-info/appnotes/an-1171.pdf
The IRS2980 utilizes International Rectifier’s control and high-voltage technologies to realize a simple, high performance dimming LED driver solution. This solution is based on a hysteretic topology where the high frequency AC output current is controlled by adjusting the oscillator frequency and duty cycle.
IRS2980主要特性:
• Dimming LED driver controller
• Hysteretic Current Regulation
• Closed-loop LED current dimming control
• Analog/PWM Dimming Input
• Internal High Voltage Regulator
• Internal 15.6V zener clamp diode on Vcc
• Micropower startup (250μA)
• Latch immunity and ESD protection
LED驅動器系統特性:
• Single chip dimming solution
• Simple LED current dimming control method
• No external protection circuits required (fully internal)
• Easy to use for fast design cycle time
• Increased manufacturability and reliability
IRS2980典型應用:
• LED incandescent/CFL replacement lamps
• LED driver module
圖1. IRS2980方框圖
圖2. IRS2980應用電路圖
采用IRS2980的90-250VAC離線LED驅動器IRPLLED7
Solid state light sources are now available that offer viable alternatives to Fluorescent and HID lamps and far surpass incandescent lamps. Luminous efficacy expressed in Lumens per Watt has now reached levels enabling LEDs to be used for general illumination. High brightness LEDs also possess the added advantages of longer operating life span up to 50000 hours and greater robustness than other less efficient light sources making them suitable for outside applications such as street lighting.
High power LEDs are ideally driven with constant regulated DC current, requiring a "driver" or "converter" to provide the required current from an AC or DC power source. A simple single stage power converter based around the IRS2980 LED driver IC provides a controlled current output over a wide AC line or DC voltage input range.
The IRPLLED7 evaluation board is an off line non-isolated constant current Buck regulator LED driver designed to supply a 350mA DC output current. The LED output voltage can be up to 90% of the input voltage, operating from an AC line input voltage between 90 and 250VAC 50/60Hz. It also includes PWM dimming capability from 10% to 100% of light output controlled by an on board potentiometer.
圖3. 90-250VAC離線LED驅動器外形圖
90-250VAC離線LED驅動器主要特性:
Featuring IRS2980S HVIC LED driver
Non-isolated buck regulator
90-250V AC input voltage
0-50V DC output voltage
Regulated output current of 350mA
PWM dimmable
圖4.90-250VAC離線LED驅動器IRPLLED7方框圖
圖5. IRPLLED7電路圖
90-250VAC離線LED驅動器IRPLLED7材料清單:
詳情請見:
http://www.irf.com/product-info/datasheets/data/irs2980spbf.pdf
和
http://www.irf.com/technical-info/appnotes/an-1171.pdf
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。