TI公司的DAC856x, DAC816x和DAC756x系列分別是低功耗電壓輸出雙路16位,14位和12位數模轉換器(DAC),集成了2.5-V,4-ppm/°C基準電壓,滿刻度輸出電壓范圍2.5V或5V,主要用于手提儀表,雙極輸出,PLC模擬輸出模塊,閉環伺服控制,壓控振蕩器, 數據采集系統和可編增益和失調調整.本文介紹了DAC856x主要特性, 方框圖, 應用電路以及DAC7562EVM評估板主要特性,電路圖和材料清單.
The DAC856x, DAC816x, and DAC756x are low-power, voltage-output, dual-channel, 16-, 14-, and 12-bit digital-to-analog converters (DACs), respectively. These devices include a 2.5-V, 4-ppm/℃ internal reference, giving a full-scale output voltage range of 2.5 V or 5 V. The internal reference has an initial accuracy of ±5 mV and can source or sink up to 20 mA at the VREFIN/VREFOUT pin.
These devices are monotonic, providing excellent linearity and minimizing undesired code-to-code transient voltages (glitch). They use a versatile three-wire serial interface that operates at clock rates up to 50 MHz. The interface is compatible with standard SPI, QSPI, Microwire, and digital signal processor (DSP) interfaces.
DAC856x主要特性:
Relative Accuracy:
DAC856x (16-Bit): 4 LSB INL
DAC816x (14-Bit): 1 LSB INL
DAC756x (12-Bit): 0.3 LSB INL
Glitch Energy: 0.1 nV-s
Bidirectional Reference: Input or 2.5-V Output
Output Disabled by Default
±5-mV Initial Accuracy (Max)
4-ppm/℃ Temperature Drift (Typ)
10-ppm/℃ Temperature Drift (Max)
20-mA Sink/Source Capability
Power-On Reset to Zero Scale or Mid-Scale
Low-Power: 4 mW (Typ, 5-V AVDD, Including Internal Reference Current)
Wide Power-Supply Range: 2.7 V to 5.5 V
50-MHz SPI With Schmitt-Triggered Inputs
LDAC and CLR Functions
Output Buffer With Rail-to-Rail Operation
Packages: QFN-10 (3x3 mm), MSOP-10
Temperature Range: –40℃ to 125℃
DAC856x應用:
• Portable Instrumentation
• Bipolar Outputs (reference design)
• PLC Analog Output Module (reference design)
• Closed-Loop Servo Control
• Voltage Controlled Oscillator
• Data Acquisition Systems
• Programmable Gain and Offset Adjustment
圖1. DAC856x方框圖
圖2. DAC8562 0-20mA/±10-V輸出電路圖
DAC7562EVM評估板
This user’s guide describes the characteristics, operation, and use of the DAC8562EVM. The evaluation model (EVM) is an evaluation board for the DAC7562 and DAC8562. The DAC7562 and DAC8562 are low-power, voltage-output, 12- or 16-bit digital-to-analog converters (DACs). These converters are controlled through a serial peripheral interface (SPI) that can operate at clock rates of up to 50MHz.
Additionally, these DACs include a 2.5V internal reference voltage (disabled by default), giving a full-scale output range of 5V when placed in a gain of two configuration. The EVM allows evaluation of all aspects of the device and allows user control over every pin on the DAC7562/DAC8562. Complete circuit descriptions, schematic diagrams, and bills of material are included in this document.
圖3. DAC7562EVM評估板外形圖
DAC7562EVM評估板主要特性:
• Full-featured evaluation board for the DAC7562 or DAC8562
• Onboard optional external reference selection
• Wide selection of digital and I/O voltages
• Hardware or software control of control logic
• Compatible with the TI Modular EVM System
• Onboard optional bipolar circuit configuration (requires installing components)
圖4.DAC7562EVM評估板電路圖
DAC7562EVM評估板材料清單:
詳情請見:
http://www.ti.com/lit/ds/symlink/dac8562.pdf
和
http://www.ti.com/lit/ug/sbau183a/sbau183a.pdf
